Hacks and Fixes

These hacks and fixes were discussed in an August 2021 library telescope webinar. View a YouTube recording of the webinar at https://youtu.be/bx_6KxiLKCs

• Powerpoint Presentation on Hacks and Fixes

  Download a PDF of the Powerpoint Presentation given on Hacks and Fixes.

  1818 Hits
• Telescope Modification Instructions (Baseline)

  Download instructions to modify the Orion Starblast Telescope.  

  2942 Hits
• Bizcard Decal for Library Telescope

  Download a decal which can be added to the library telescope so that patrons can quickly access training on the LibraryTelescope.org website.

  

  1594 Hits
• Telescope Signs and Decals

  Download these ideas provided by the Stillwater Stargazers in Ohio.  

  1717 Hits
• Adding an Auxiliary Case to the RDF

  Download the alternate instructions to solder connections for the Red Dot Finder.    The alternate approach appears more reliable than other approaches.

  1718 Hits
• Alternate Moon Map for the Telescope

  

  2102 Hits
• Alternate Constellation Guide

  Use this guide to the constellations as an alternate to the Audubon Constellation Guide, courtesy of the Arkansas Natural Sky Association.

  4223 Hits

• 3D File - Tube Cover with Moon Port (Zhumell Z114 or Pre-2023 Orion Starblast)

  A tube cover for the 2023 model of the Orion Starblast.

  

  758 Hits
• 3D File - Saddle Finder (Zhumell Z114 or Pre-2023 Orion Starblast)

  Use your 3d printer to replace your red dot finder with this simple, saddle shaped finder that is easy to use and requires no batteries.  NOTE:  This design was updated on 8/11/2023 with larger (0.25") alignment holes for better eye relief.  

  

  1739 Hits
• 3D File - Saddle Finder (2023 Orion Starblast)

  Use your 3d printer to replace your red dot finder with this simple, saddle shaped finder that is easy to use and requires no batteries. The design has 0.25" alignment holes for better eye relief.

  NOTE:  Different than shown in the picture provided below, the design was adjusted to fit the 2023 model of Orion which uses a dovetail mount.  

  

  167 Hits
• 3D File - Tube Finder (Zhumell Z114 or Pre-2023 Orion Starblast)

  Use your 3D printer to replace your red dot finder with this simple, tube shaped finder that is easy to use and requires no batteries.

  

  1730 Hits
• 3D File - Finder Scope Screw (Zhumell Z114 or Pre-2023 Orion Starblast)

  Use your 3d printer to replace a missing screw at the base of the view finder.

  

  1727 Hits
• 3D File - Eyepiece Cap

  Use your 3d printer to replace your missing Celestron ZOOM eyepiece cap.

       

  1656 Hits
• 3D File - Eye Guard Alternative 1

  Use your 3D printer to print this alternative eyeguard.

  

   

  1605 Hits
• 3D File - Eye Guard Alternate 2

  Use your 3D printer to print the alternative eye guard.

  

   

  1531 Hits
• 3D File - Eyeguard Alternative 3

  Use your 3D printer to print the alternative eye guard. Use TPU filament to get the rubbery feel.  

  

  2185 Hits
• 3D File - Focuser Slip and Rack (Zhumell Z114 or Pre-2023 Orion Starblast)

  

  3D printed replacement focuser slip and rack (courtesy of Chuck Simms, Astronomical Society of Eastern Missouri)

  1114 Hits
• 3D File - Visual Back (Zhumell Z114 or Pre-2023 Orion Starblast)

  The plastic piece on your focuser where the ZOOM eyepiece is inserted can sometimes crack or break. Use your 3D printer to print this replacement.   This 3D design was revised on 9/7/2021 for a better fit.

   

  1667 Hits
• 3D File - Hex Nut Knob (Zhumell Z114 or Pre-2023 Orion Starblast)

  Do want a nut on the bottom of your telescope that can be hand-tightened? Use a 3D printer to print a replacement.

      

  1634 Hits
• 3D File - Hex Nut Lock (Zhumell Z114 or Pre-2023 Orion Starblast)

  Do want a nut on the bottom of your telescope that can be locked with screws? Use a 3D printer to print a replacement.

     

  1660 Hits
• 3D File - Tube Cover (with Moon Port) (Zhumell Z114 or Pre-2023 Orion Starblast)

  Use your 3D printer to make this tube cover with a Moon port.

  

   

  1245 Hits
• 3D File - Tube Cover (no Moon port) (Zhumell Z114 or Pre-2023 Orion Starblast)

  Use your 3D printer to make a tube cover (no Moon port).

  905 Hits
• 3D File - No Battery Finder. This is a ZIP file including the STL file, labels, and more.

  The No Battery Finder (NBF) is a 3D printed finder that can replace the traditional red dot finder.

  Use this weblink to download the 3D STL file, labels, instructions, and other materials related to the No Battery Finder.

  An instructional video on how to assemble the NBF can be found at this link:  https://youtu.be/8_ics6zS5I4

  

   

   

  1030 Hits
• 3D File - Focuser Tube/Collar (Zhumell Z114 or Pre-2023 Orion Starblast)

  A 3D printed replacement focuser tube and collar for the Orion StarBlast (pre-2023) and Zhumell Z114.

   

  

  764 Hits
• 3D File - Finder Adaption for RDF

  Modify your red dot finder with a 3D printed sighting system requiring no batteries.

  

   

  47 Hits